— 咨询热线 — 13001746654
网站首页 关于拉森 服务项目 案例中心 新闻资讯 联系我们 在线留言

行业动态

首页-新闻资讯-钢板桩施工过程中如何进行检验呢?

新闻资讯

来源:http://www.jnlsgbz.com/ 日期:2020-09-22 发布人:lasen
  拉森钢板桩在实际中的应用是比较广泛的一种,在除了安全之外还是很多是不可忽略的问题,就好像拿质量来说。我们是可以看出来的,根据加工制作工艺和不同型号的钢板桩在同样面积中所含有的重量不一样,我们可以根据理论重量来识别价格是否合适。
  Larsen steel sheet pile is widely used in practice. In addition to safety, there are many problems that can not be ignored, just like taking quality as an example. We can see that according to the processing technology and the weight of different types of steel sheet piles in the same area is not the same, we can identify whether the price is appropriate according to the theoretical weight.
  通过了解钢板桩的理论重量,在选购拉森钢板桩时就不会被等级不够或者劣质的钢板桩所欺骗。因此拉森钢板桩的质量可以通过重量来判断,故而在选购时候要多加注意。
  By understanding the theoretical weight of steel sheet pile, Larson steel sheet pile will not be cheated by the steel sheet pile with insufficient grade or poor quality. Therefore, the quality of Larsen steel sheet pile can be judged by the weight, so more attention should be paid when purchasing.
  拉森钢板桩施工过程中,做好检验工作是非常重要的,那么一般要如何进行检验呢?
  In the construction process of Larsen steel sheet pile, it is very important to do a good job of inspection, so how to carry out the inspection generally?
               钢板桩施工租赁
  对拉森钢板桩材料的化学成分及机械性能进行全面试验。包括钢材的化学成分分析,构件的拉伸、弯曲试验,锁口强度试验和延伸率试验等项内容。每一种规格的钢板桩至少进行一个拉伸、弯曲试验:每20-50t重的钢板桩应进行两个试件试验。
  The chemical composition and mechanical properties of Larsen steel sheet pile are tested comprehensively. It includes chemical composition analysis of steel, tensile and bending tests of components, strength test and elongation test of lock. At least one tensile and bending test shall be conducted for each type of steel sheet pile: two test pieces shall be conducted for each 20-50t steel sheet pile.
  堆放的顺序、位置、方向和平面布置等应考虑到以后的施工方面; 钢板桩应分层堆放,每层堆放数量一般不超过5根,各层间要垫放枕木,垫木间距一般为3~4m,且上、下层垫木应在同一垂直线上,堆放的总高度不宜超过2m。
  The stacking sequence, position, direction and plane layout should consider the future construction; the steel sheet piles should be stacked in layers, and the stacking quantity of each layer is generally no more than 5. Sleepers should be padded between each layer, and the spacing between the cushions is generally 3 ~ 4m, and the upper and lower layers should be on the same vertical line, and the total height of stacking should not be more than 2m.
  因此在拉森钢板桩使用前,一定要重视检验工作,从而确保其良好的性能。
  Therefore, before using Larsen steel sheet pile, we must pay attention to the inspection work, so as to ensure its good performance.
公司名称:济南拉森基础工程有限公司       备案号:鲁ICP备19001597号 网站地图  XML  TXT

鲁公网安备 37010502001064号